Audioengine A2+ Home Music System w/ Bluetooth aptX Wireless Speakers

The A2+ Home Music System is perfect for the desktop and can fill your rooms with full and clear sound. Setup is a snap, so you’ll be ready to rock in no time. Connect via USB audio from your computer, aptX Bluetooth from your phone, tablet or computer, or kick it old school with an analog connection from that turntable or prized tape deck.

The A2+ also features an output so you can upgrade your system and boost your bass in a heartbeat by connecting a subwoofer, like the Audioengine S6.

We designed the A2+ to exceed your expectations for sound while not exceeding the limits of your budget.

With bass you’d expect from a nightclub and a cabinet that fits both your desktop and your aesthetic, the A2+ has found a middle ground that’s miles beyond the rest.

Don’t let their size fool you.
These little speakers are packed with much more sound than you would expect. Clear, full, and powerful audio ideal for your computer and smaller rooms.

The A2+ Wireless Computer Speakers are constructed with custom Audioengine components: aramid fiber woofers, silk tweeters, extended-range wireless aptX Bluetooth, and built-in power amps wrapped in precision-tuned, hand-crafted cabinets. In other words, we put a lot of thought into these speakers.

The sound will fill almost any room. The speaker itself won’t.

Whether you’re rocking a computer, tablet, phone, or turntable, setting up the A2+ Wireless Computer Speakers is easy. Plus, there are no network settings, passwords to enter, or other setup hassles. You’ll be listening to your favorite tunes in no time.

What's in the box
1 A2+ Home Music System w/ Bluetooth aptX powered (left) speaker
1 A2+ Home Music System w/ Bluetooth aptX passive (right) speaker
1 Speaker wire (16AWG)
1 USB cable
1 Power supply w/ detachable AC cord
1 Mini-jack audio cable
2 Microfiber speaker bag
1 Microfiber cable bag
1 Microfiber power supply bag
1 Setup guide

General Specifications
Type
Powered Bluetooth aptX speaker system

Amplifier Type
Class AB

Power Output
60 W peak power total (15 W RMS / 30 W peak per channel), AES

Drivers
2.75” aramid fiber woofers

0.75“ Silk dome tweeters

Inputs
3.5 mm stereo mini-jack, RCA L/R, USB, Bluetooth

Outputs
RCA variable line-out

Input Voltages
100-240 V 50/60 Hz auto-switching

SNR
>95 dB (typical A-weighted)

THD+N
<0.05% at all power settings

Crosstalk
<50 dB

Frequency Response
65 Hz-22 kHz ±2.0 dB

Frequency Response w/ Bass Reduction Switch selected
N/A

Analog Input Impedence
N/A

Nominal Impedence
N/A

Input Impedence
10K ohms unbalanced

Crossover Frequency
N/A

Protection
Output current limiting, thermal over-temperature, power on/off transient protection

Power Consumption
Idle: 10W

Standby Consumption
N/A

Phase
N/A

Recommended Amplifier Power
N/A

Battery Life
N/A

Battery Charge Time
N/A

Internal D/A Converter
N/A

Bluetooth Receiver Type
Bluetooth 5.0

Supported Codecs
aptX, AAC, SBC

Internal BT Receiver
CSR8670

Input Bit Depth
16 bit

Supported Bluetooth Profiles
N/A

Wireless Operation Range
Up to 100 ft (30 m) typical

Input Data Rate
Determined by Bluetooth

Wireless Latency
~30 milliseconds (ms)

USB Connector Type
Micro-USB

USB Device Class
type 1.1 and above

Input Bit Depth
up to 16 bit native

Input Sample Rate
up to 48 kHz native

Dimensions (HWD)
Each speaker - 6" (15.2 cm) x 4" (10.2 cm) x 5.25" (13.3 cm)

Weight
Left (active) - 3.6 lb (1.6 kg)
Right (passive) - 3.2 lb (1.4 kg)